Datasheet

 2009-2012 Microchip Technology Inc. DS70593D-page 193

dsPIC33FJXXXGPX06A/X08A/X10A

bit 3 S: Start bit

1 = Indicates that a Start (or Repeated Start) bit has been detected last

0 = Start bit was not detected last

Hardware set or clear when Start, Repeated Start or Stop detected.

bit 2 R_W: Read/Write Information bit (when operating as I

C slave)

1 = Read - indicates data transfer is output from slave

0 = Write - indicates data transfer is input to slave

Hardware set or clear after reception of I

C device address byte.

bit 1 RBF: Receive Buffer Full Status bit

1 = Receive complete, I2CxRCV is full

0 = Receive not complete, I2CxRCV is empty

Hardware set when I2CxRCV is written with received byte. Hardware clear when software

reads I2CxRCV.

bit 0 TBF: Transmit Buffer Full Status bit

1 = Transmit in progress, I2CxTRN is full

0 = Transmit complete, I2CxTRN is empty

Hardware set when software writes I2CxTRN. Hardware clear at completion of data transmission.