Datasheet

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
DS70616F-page 550 Preliminary © 2009-2012 Microchip Technology Inc.
FIGURE 32-35: ECAN™ MODULE I/O TIMING CHARACTERISTICS
TABLE 32-51: ECAN™ MODULE I/O TIMING REQUIREMENTS
FIGURE 32-36: UART MODULE I/O TIMING CHARACTERISTICS
TABLE 32-52: UART MODULE I/O TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param. Symbol Characteristic
(1)
Min. Typ.
(2)
Max. Units Conditions
CA10 TioF Port Output Fall Time — — — ns
See parameter DO32
CA11 TioR Port Output Rise Time — — — ns See parameter DO31
CA20 Tcwf Pulse Width to Trigger
CAN Wake-up Filter
120 — — ns —
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +125°C
Param. Symbol Characteristic
(1)
Min. Typ.
(2)
Max. Units Conditions
UA10 Tuabaud UART Baud Time 66.67 — — ns —
UA11 Fbaud UART Baud Frequency — — 15 mbps —
UA20 Tcwf Start Bit Pulse Width to Trigger
UART Wake-up
500 — — ns —
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
CiTx Pin
(output)
CA10 CA11
Old Value
New Value
CA20
CiRx Pin
(input)
UA20
UiRX
MSb In
LSb In
Bit 6-1
UA10
UITX