Datasheet

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
DS70616F-page 498 Preliminary © 2009-2012 Microchip Technology Inc.
TABLE 32-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ + 85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param.
(2)
Typ.
(3)
Max. Units Conditions
Operating Current (I
DD)
(1)
DC20d 12 18 mA -40°C
3.3V 10 MIPS
DC20a 12 18 mA +25°C
DC20b 13 20 mA +85°C
DC20c 14 21 mA +125°C
DC22d 23 35 mA -40°C
3.3V 20 MIPS
DC22a 24 36 mA +25°C
DC22b 24 36 mA +85°C
DC22c 25 38 mA +125°C
DC24d 42 63 mA -40°C
3.3V 40 MIPS
DC24a 43 65 mA +25°C
DC24b 44 66 mA +85°C
DC24c 45 68 mA +125°C
DC25d 61 92 mA -40°C
3.3V 60 MIPS
DC25a 62 93 mA +25°C
DC25b 62 93 mA +85°C
DC25c 63 95 mA +125°C
DC26d 69 104 mA -40°C
3.3V 70 MIPSDC26a 70 105 mA +25°C
DC26b 70 105 mA +85°C
Note 1: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode and external clock active, OSC1 is driven with external square
wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: These parameters are characterized but not tested in manufacturing.
3: Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.