00-pin TQFP PT ETHERNET with PIC32MX795F512L v7
Card information The ETHERNET MCU card is shown on Figure 4-1. It contains PIC32MX795F512L microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device. 1 PIC32MX795F512L has 80MHz maximum frequency, 512K bytes of program memory (flash), 128K bytes of data memory.
VCC C3 100nF VCC C4 100nF VCC C5 100nF VCC C6 100nF RC4 RC2 RE7 RE5 VCC VCC C2 100nF VCC RB0 RB2 RB4 RE9 RA0 MCLR# VCC C1 100nF 103 101 99 97 95 93 91 89 87 85 83 81 79 VCC C7 100nF VCC RG15 RG9_ETH MCLR# RG8_ETH RG7_RST# RG6 RC4 RC3 RC2 RC1 RE7 RE6 RE5 RB0 RB1 RB2 RB3 RB4 RB5 RE9 RE8 RA0 GND RB1 RB3 RB5 RE8 RG6 RC3 RC1 RE6 RG15 GND 104 102 100 98 96 94 92 90 88 86 84 82 80 HD3 VCC VCC E2 10uF 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 E1 10uF 2 4 6 8 10 12 14 1
Card dimensions 2200 mils 100 mils 2000 mils 2405 mils 940 mils 2000 mils 2200 mils Figure 3: MCU card dimensions.
If you want to learn more about our products, please visit our website at www.mikroe.com If you are experiencing some problems with any of our products or just need additional information, please place your ticket at www.mikroe.com/esupport If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.
