Datasheet
PIC32MX5XX/6XX/7XX
DS61156G-page 192 © 2009-2011 Microchip Technology Inc.
TABLE 31-12: PROGRAM FLASH MEMORY WAIT STATE CHARACTERISTICS
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C
≤ TA ≤ +105°C for V-Temp
Required Flash Wait States SYSCLK Units Comments
0 Wait State 0 to 30 MHz —
1 Wait State 31 to 60
2 Wait States 61 to 80
TABLE 31-13: COMPARATOR SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C
≤ TA ≤ +105°C for V-Temp
Param.
No.
Symbol Characteristics Min. Typical Max. Units Comments
D300 VIOFF Input Offset Voltage — ±7.5 ±25 mV AVDD = VDD,
A
VSS = VSS
D301 VICM Input Common Mode Voltage 0 — VDD VAVDD = VDD,
A
VSS = VSS
(Note 2)
D302 CMRR Common Mode Rejection Ratio 55 — — dB Max VICM = (VDD - 1)V
(Note 2)
D303 TRESP Response Time — 150 400 ns AVDD = VDD,
AV
SS = VSS
(Notes 1, 2)
D304 ON2OV Comparator Enabled to Output
Valid
——10μs Comparator module is
configured before setting
the comparator ON bit
(Note 2)
D305 IVREF Internal Voltage Reference 0.57 0.6 0.63 V For devices without
BGSEL<1:0>
1.14 1.2 1.26 V BGSEL<1:0> =
00
0.57 0.6 0.63 V BGSEL<1:0> = 01
Note 1:
Response time measured with one comparator input at (VDD – 1.5)/2, while the other input transitions
from V
SS to VDD.
2: These parameters are characterized but not tested.