Datasheet

PIC32MX5XX/6XX/7XX
DS61156G-page 188 © 2009-2011 Microchip Technology Inc.
Module Differential Current
(7)
for PIC32MX534/564/664/764 Family Devices
DC41c — 10 μA — 2.5V Watchdog Timer Current: ΔIWDT (Notes 3,6)
DC41d 5 — μA — 3.3V Watchdog Timer Current: ΔIWDT (Note 3)
DC41e — 20 μA — 3.6V Watchdog Timer Current: ΔIWDT (Note 3)
DC42c — 40 μA — 2.5V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Notes 3,6)
DC42d 23 — μA — 3.3V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Note 3)
DC42e — 50 μA — 3.6V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Note 3)
DC43c — 1300 μA — 2.5V ADC: ΔIADC (Notes 3,4,6)
DC43d 1100 — μA — 3.3V ADC: ΔIADC (Notes 3,4)
DC43e — 1300 μA — 3.6V ADC: ΔIADC (Notes 3,4)
TABLE 31-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C
≤ TA ≤ +105°C for V-Temp
Param.
No.
Typical
(2)
Max. Units Conditions
Note 1:
Base IPD is measured with all digital peripheral modules and being clocked, CPU clock is disabled. All I/Os
are configured as inputs and pulled low. WDT and FSCM are disabled.
2: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
4: Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
5: Data is characterized at +70°C and not tested. Parameter is for design guidance only.
6: This parameter is characterized, but not tested in manufacturing.
7: This information is preliminary.