Datasheet

EasyTF T
page 2
The EasyTFT board as shown on Figure 1 contains 2.83" TFT color display MI0283QT-9A with 320x240 pixel resolution, which is driven by ILI9341 display controller,
capable of showing advanced graphical content. Each pixel can display 262K dierent colors. TFT display is covered with a resistive touch panel which can be used as input
device. The board is primarily designed to be used as a display board on mikroElektronika Easy development boards. It perfectly ts with the uniquely designed plastic
distancer on the GLCD Easy development board socket. For further connectivity there are two female headers, with data and control pinout lines (CN1 and CN3). After
testing and building the nal program, this card can also be used in your nal device. The board also contains mounting holes for easier integration into your designs.
Board information
2
3
1
1
2
Figure 1: EasyTFT board
320x240 pixel 2.83" color TFT display with LED back-light,
ILI9341 controller and resistive touch panel.
CN1 female header pinout:
RD - Read signal line
WR - Write signal line
GND - Reference ground
VCC - Power supply
RS - Command/data select line
CS - Chip selection line
D0-D7 - Data lines
RST - Display reset line
+5V - 5V back-light power supply
BPWM - Back-light PWM line
CN3 female header pinout:
XR - Right side touch panel coordinate
YU - Up side touch panel coordinate
XL - Left side touch panel coordinate
YD - Down side touch panel coordinate
3