HP Ethernet MCU card with STM32F407VGT6 (100-pin TQFP) EasyMx PRO v7
Card information The HP ETH MCU card is shown on Figure 1. It contains STM32F407VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device. 2 4 1 3 1 STM32F407VGT6 chip has 168MHz frequency, 1 Mbyte of Flash memory, 192K + 4K bytes of general-purpose SRAM, integrated Ethernet controller, USB 2.
C1 100nF C2 100nF C3 100nF VCC C4 100nF VCC C5 100nF VREF C6 100nF C7 100nF PA5 PA3 VCC VCC VCC VCC PE15 PE13 PE11 PE9 PE7 PB1 VCC 103 101 99 97 95 93 91 89 87 85 83 81 79 VCC GND PA6 PA4 GND PE14 PE12 PE10 PE8 PB2 PB0 104 102 100 98 96 94 92 90 88 86 84 82 80 HD3 VCC VCC C15 2.
Card dimensions 940 300 2220 2405 170 470 2220 Figure 3: MCU card dimensions. Values are in mils.
If you want to learn more about our products, please visit our web site at www.mikroe.com If you are experiencing some problems with any of our products or just need additional information, please place your ticket at www.mikroe.com/esupport If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.
