Ethernet MCU card with STM32F107VCT6 (100-pin TQFP) EasyMx PRO v7
Card information The Default MCU card that comes with the EasyMx PRO™ v7 for STM32® package is shown on Figure 1. It contains STM32F107VCT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device. 2 4 1 3 1 STM32F107VCT6 is the default chip of EasyMx PRO™ v7 for STM32®.
C1 100nF C2 100nF C3 100nF VCC C4 100nF VCC VREF C5 100nF C6 100nF PA5 PA3 VCC VCC VCC VCC PE15 PE13 PE11 PE9 PE7 PB1 VCC 103 101 99 97 95 93 91 89 87 85 83 81 79 VCC C7 100nF PA6 PA4 GND GND PE14 PE12 PE10 PE8 PB2 PB0 104 102 100 98 96 94 92 90 88 86 84 82 80 HD3 VCC VCC VCC 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 R1 100K PA3 E2 10uF PB11 PB10_RXER PE15 PE14 PE13 PE12 PE11 PE10 PE9 PE8 PE7 PB2 PB1 PB0 PC5 PC4 PA7 PA6 PA5 PA4 E1 10uF TXP RX
Card dimensions 940 300 2220 2405 170 470 2220 Figure 3: MCU card dimensions. Values are in mils.
If you want to learn more about our products, please visit our web site at www.mikroe.com If you are experiencing some problems with any of our products or just need additional information, please place your ticket at www.mikroe.com/esupport If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.
