Datasheet

page 11
Empty HP MCU card for 100-pin
STM32F2(4)0x MCUs
Empty ETH MCU card for 100-pin
STM32F10x MCUs
Empty ETH HP MCU card for 100-
pin STM32F2(4)0x MCUs
Empty MCU card for 100-pin
STM32F10x MCUs
Standard 100-pin HP ETH MCU
card with STM32F207VGT6
Default 100-pin ETH MCU card
with STM32F107VCT6
Standard 100-pin HP ETH MCU
card with STM32F407VGT6
EasyMx PRO
v7
mikroElektronika currently oers total of three populated MCU cards. Two with
Cortex
™
-M3: STM32F107VCT6 microcontroller (default), STM32F207VGT6
microcontroller and one with Cortex
™
-M4: STM32F407VGT6 microcontroller. You
can also purchase empty PCB cards that you can populate on your own and solder
any supported microcontroller you need in your development. There are total of
four empty PCB cards available. This way your EasyMx PRO
™
v7 for STM32 board
becomes truly exible and reliable tool for almost any of your ARM® projects. MCU
cards can also be used in your nal devices. For complete list of currently available
MCU cards, please visit the board webpage:
"HP" (High performance) - Empty
MCU cards that support only high
performance STM32F20x and
STM32F40x microcontrollers family.
Other supported MCU cards
http://www.mikroe.com/eng/products/view/852/easymx-pro-v7-for-stm32/
supported MCUs
"ETH" (Ethernet) - Empty MCU cards
with single-chip Ethernet PHY
layer transceiver which provides
additional Ethernet functionality to
microcontrollers
NOTE: