User manual

13

If you successfully connect you’ll see this conﬁrmed in

the History Window

ClicktoChoosethe

firmware.hexfile

Click the Browse for HEX button, navigate to the folder where you

extracted the ﬁrmware ﬁles and select the ﬁrmware .hex ﬁle.

Boardconnected

To complete the process, click the Begin Uploading button.

Clicktouploadthefirmware

Uploadingprogressisshownhere

When the Success dialog shows the

ﬁrmware has been updated. You can

now use your FlowPaw again.