User manual
6. FirmwareUpgrades
!
12
The capabilities of your FlowBoard can be expanded and
improved by upgrading the firmware. This is not as scary
as it sounds. It’s really easy - anyone can do it by simply
following the steps below.
1
Unzip the files to a folder on your PC. There are three:
the updater program mikroBootloader USB HID.exe,
the firmware (a .hex file) and an instruction PDF which
matches the instructions you’ll find here.
Download the latest firmware package from here:
www.flowpaw.com/files/firmware.zip
Make sure your FlowPaw is connected to your PC.
Run
2
Press and hold both Button 1 and the
Reset button on your FlowPaw.
Now release the Reset button but
keep Button 1 held until the "
red LED1 is illuminated
The USB indicator on the
mikroBootloader program will go red
3
Button1
Reset
You now have 5-10 seconds to click
the Connect button
4
ClicktoConnect