User`s guide

EasyMx PRO
v7
Introduction
introruction
page 4
ARM® Cortex
™
-M3 and Cortex
™
-M4 are increasingly popular
microcontrollers. They are rich with modules, with high performance
and low power consumption, so creating a development board the
size of EasyMx PRO
™
v7 was really a challenge. We wanted to put as
many peripherals on the board as possible, to cover many internal
modules. We have gone through a process of ne tuning the
board's performance, and used 4-layer PCB to achieve maximum
eciency. Finally, it had met all of our expectations, and even
exceeded in some. We present you the board which is powerful,
well organized, with on-board programmer and debugger and
is ready to be your strong ally in development.
EasyMx PRO
™
v7 development Team
EasyMx PRO
™
v7 is all about
connectivity. Having two
dierent connectors for
each port, you can connect
accessory boards, sensors and
your custom electronics easier
then ever before.
Powerful on-board mikroProg
™
programmer and hardware
debugger can program and
debug over 270 Stellaris
ARM® microcontrollers. You
will need it, whether you are a
professional or a beginner.
Two connectors for each port Everything is already here
Amazing connectivity mikroProg
™
on board
TFT 320x240 with touch panel,
stereo mp3 codec, audio input
and output, navigation switch
and microSD card slot make a
perfect set of peripherals for
multimedia development.
Ready for all kinds of development
Multimedia peripherals
Just plug in your Click
™
board,
and it’s ready to work. We picked
up a set of the most useful pins
you need for development and
made a pinout standard you will
enjoy using.
For easier connections
mikroBUS
™
support