User manual

page 13
Analog System Lab Kit PRO
System Lab Kit overview
ASLK PRO has been developed at Texas Instruments India. This kit is designed for
undergraduate engineering students to perform analog lab experiments. The main
ideabehindASLKPROistoprovideacostecientplatformortestbedforstudents
to realize almost any analog system using general purpose ICs such as OP-Amps and
analog multipliers.
ASLKPROcomeswiththreegeneral-purposeoperationalampliers(TL082) and three
wide-bandwidth precision analog multipliers (MPY634) from Texas Instruments. We
have also included two 12-bit parallel-input multiplying digital-to-analog converters
DAC7821, a wide-input non-synchronous buck-type DC/DC controller TPS40200, and
a low dropout regulator TPS7250 from Texas Instruments. A portion of ASLK PRO is
left for general-purpose prototyping which can be used for carrying out mini-projects.
Hardware
The kit has a provision to connect ±10V DC power supply. The kit comes with the
necessary short and long connectors.
This comprehensive user manual included with the kit gives complete insight of how
to use ASLK PRO. The manual covers exercises of analog system design along with
brief theory and simulation results.
Refer to Appendix A for the details of the integrated circuits that are included in ASLK
PRO. Refer to Appendix D for additional details of ASLK PRO.
introduction
The following software is necessary to carry out the experiments suggested in this
manual.
1. TINA or PSpice or any powerful simulator based on the SPICE Simulation Engine
2. FilterPro-Asoftwareprogramfordesigninganaloglters
3. SwitcherPro - A software program for designing power supplies
We will assume that you are familiar with the concept of simulation and are able to
simulate a given circuit.
FilterPro isaprogramfordesigningactivelters.Atthetimeofwritingthismanual,
FilterProVersion3.1isthelatest.Itsupportsthedesignofdierenttypesoflters,
namely Bessel, Butterworth, Chebychev, Gaussian, and linear-phase lters. The
softwarecanbeusedtodesignlow-passlters,high-passlters,band-stoplters,
andband-passlterswithupto10poles.Thesoftwarecanbedownloadedfrom[9].
Software
Analog System Lab Kit PRO