User manual

91
Create a Standard TCP/IP port using raw protocol and install a Boca Systems printer driver.
Windows 7 operating system
Printer Drivers
If the intent is to install the Boca Systems Ethernet printer with a Boca Systems printer driver, please install
the drivers onto the PC before proceeding with the steps outlined below. If needed click on the link below to
download and save the self extracting executable file on the local PC at perhaps c:\boca. Once saved,
double click on the file to unzip and run it. This will install the printer drivers into the PCs driver store. Then
when installing the printer drivers (step 14 below) the drivers will appear as shown in the second picture
below.
Windows Printer Driver Link -> http://www.bocasystems.com/printer_drivers.exe
Cables
A standard Ethernet cable can be used with the printer as long as it is plugged into a router or switch box.
An Ethernet crossover cable must be used if the intent is to plug the printer directly into a local PC.
Directions
Begin by clicking on “Start Button” and then click on “Devices and Printers”. From this window, click on “Add a
Printer” and the following screen appears.
Select “Add a Local Printer”. Click “Next”.