User manual

72
TICKET TYPE COMMAND - <typ#>
Note: This function is set at the factory and should not be changed.
This command sets the ticket type (opto configuration) of the printer. The values can range as shown below:
0 - Normal ticket
1 - ATM ticket
2 - Label ticket
3 - Special ticket
STATUS ENABLED COMMAND - <se#>
This command enables or disables status responses from the printer to the Host. The values can range as
shown below:
0 - None (disabled)
1 - Serial
2 - Parallel
3 - Ser/Par
4 - USB
5 - USB/Ser
6 - USB/Par
7 - USB/Ser/Par
Note: Bi-directional parallel mode must be set first for Par options to be valid.
Note: USB mode must be set first for USB options to be valid.
TRANSPARENT MODE ENABLED/DISABLED COMMANDS - <tme>/<tmd>
These commands set the printer in transparent mode <tme> or non-transparent mode <tmd> after initializing.
PAPER MODE ENABLED/DISABLED COMMANDS - <pme>/<pmd>
Note: This function is set at the factory and should not be changed.
These commands set the printer in paper mode <pme> or non-paper mode <pmd> after initializing.
PRINT HEAD DPI COMMAND - <dpi200>, <dpi300> or <dpi600>
Note: This function is set at the factory and should not be changed.
This commands sets the printer up as a 200, 300 or 600 dpi printer.
SPECIAL HEAD SETTING COMMAND - <sph#>
Note: This function is set at the factory and should not be changed.
This command sets the special head setting for the printer. The values can range from as shown below:
0 - no special head
1 - special head size path 1 # Note: this is for non-reversible paper guide.
2 - special head size path 2 # Note: this is for non-reversible paper guide.
3 - special head size both paths # Note: this is for non-reversible paper guide.
4 - reverse adjustable 2” path1
5 - reverse adjustable 2” path2
6 - reverse adjustable 2” both paths
7 - reverse adjustable 2.5” path1
8 - reverse adjustable 2.5” path2
9 - reverse adjustable 2.5” both paths
10 - reverse adjustable 2.7” path1
11 - reverse adjustable 2.7” path2
12 - reverse adjustable 2.7” both paths
13 - reverse adjustable 3.0” path1
14 - reverse adjustable 3.0” path2
15 - reverse adjustable 3.0” both paths
16 - reverse adjustable 2.125” path1
17 - reverse adjustable 2.125” path2
18 - reverse adjustable 2.125” both paths
19 - reverse adjustable 3.25” path1
20 - reverse adjustable 3.25” path2
21 - reverse adjustable 3.25” both paths