User manual

16
values. This command should only be used by customers that are modifying the font data with their own
bitmaps. This command will be stored in flash, if present, and will remain in effect until disabled.
EXPANDED CHARACTER MODE DISABLE COMMAND - <xd>
This is the normal default condition of the printer. This command is used to disable the function of the <xe>
command mentioned above. This command will be stored in flash, if present, and will remain in effect until a
<xe> is issued.
TRANSLATION TABLE COMMAND - <TT#> or <tt#>
See the downloading font supplement for further details.
RESIDENT FONT TRANSLATION TABLE ENABLE/DISABLE COMMAND - <TRE><TRD> or <tre><trd>
See the downloading font supplement for further details. (New command)
TEST BUTTON DISABLED COMMAND - <td>
Some customers have to keep a very tight inventory of their ticket stock and therefore they do not want anyone
printing test tickets. The <td> command disables the test button on the printer. This command will be stored in
flash, if present, and will remain in effect until re-enabled by the <te> command.
TEST BUTTON ENABLED COMMAND - <te>
This is the normal default condition of the printer. This command is used to enable the function of the <td>
command mentioned above. This command will be stored in flash if present and will remain in effect until
disabled.
PCX FILE BEING SENT COMMAND - <pcx> [not available on 22/24/26]
This command notifies the printer that a PCX image file is being sent to the printer. This command must be sent
as part of a command sequence like <SP#,#><pcx><G#>pcx bytes. See the BMP & PCX supplement for
further details.
BMP FILE BEING SENT COMMAND - <bmp> [available on 26/46 only]
This command notifies the printer that a BMP image file is being sent to the printer. This command must be
sent as part of a command sequence like <SP#,#><bmp><G#>pcx bytes. See the BMP & PCX supplement for
further details.
PRINT ON TICKET PATH #1 - <P1>
See the dual printer supplement for further details.
PRINT ON TICKET PATH #2 - <P2>
See the dual printer supplement for further details.
DUAL PRINTER MODE - <pb><pb1>
See the dual printer supplement for further details
DUAL SUPPLY MODE - <pb2>
See the dual printer supplement for further details.
VENTEK DUAL SUPPLY MODE - <pb3>
See the dual printer supplement for further details.
CASH DRAW A COMMAND - <DA>
This command generates a 50 ms pulse to open the A cash draw. When using this command don't use the old
1CH cash draw command.
CASH DRAW B COMMAND - <DB>
Certain printers are configured with two cash draws, side A and B. This command generates a 50 ms pulse to
open the B cash draw. When using this command don't use the old 1CH cash draw command.
ENABLE TEST TICKET ACKNOWLEDGE COMMAND - <ta>
Normally, no acknowledgment is sent when a test ticket is printed. For customers preferring to keep track of
each test ticket printed, an ack character (5) will be sent if this function is enabled by the <ta> command. This
command will be stored in flash if present and will remain in effect until disabled by the <dta> command below.