User manual

129
APPENDIX B - GHOSTWRITER COMMANDS - Quick Reference Chart
• ROW/COLUMN COMMAND - <RCx,y>
• ROTATION COMMAND - <NR> No rotation
<RR> Rotate right (+90)
<RU> Rotate upside down (+180)
<RL> Rotate left (+270 or - 90)
• HEIGHT/WIDTH COMMAND - <HWx,y>
• FONT SIZE COMMAND - <F1> Font1 characters (5x7)
<F2> Font2 characters (8x16)
<F3> OCRB (17x31)
<F4> OCRA (5x9)
<F6> large OCRB (30x52)
<F7> OCRA (15x29)
<F8> Courier (20x40)(20x33)
<F9> small OCRB (13x20)
<F10> Prestige (25x41)
<F11> Script (25x49)
<F12> Orator (46x91)
<F13> Courier (20x40)(20X42)
• BOXSIZE COMMAND - <BSx,y>
• CLEAR BUFFER COMMAND - <CB>
• GRAPHICS COMMAND - <G>byte1,byte2,byte3,byte4,byte5,byte6,byte7 OR
<G#>byte1,byte2...byte#
• ASCII GRAPHICS COMMAND - <g#>ASCII high byte1,ASCII low byte1 ... byte#
• BAR CODE INTERPRETATION COMMAND - <BI>
• BAR CODE SELECT COMMAND - <AB#>string or <aB#>string
Old style - rotation commands have no effect on bar codes.
A= U (for upc and ean8)
A= E (for ean-13)
A= N (for three of nine)
A= F (for interleaved two of five)
A= C (for uss-codabar)
A= O (for code 128)
New style - rotation commands do effect bar codes.
a= u (for upc and ean8)
a= e (for ean-13)
a= n (for three of nine)
a= f (for interleaved two of five)
a= c (for uss-codabar)
a= o (for code 128)
a= s (for softstrip)
B= P (for picket-fence)
B= L (for ladder)
# = width of bar code
string = bar code data
• BAR CODE EXPANDED COMMAND - <X#>
• BAR CODE RATIO ADJUST - <AXB#>string or <aXB#>string
• PRINTING LENGTH COMMAND - <PL#> or <pl#>
• PERMANENT TICKET LENGTH COMMAND - <tl#>
• DELETE PERMANENT LENGTH COMMAND - <dpl>
• REPEAT COMMAND - <RE#> not available on Mag printers
• TRANSPARENT MODE ON - <t>
• TRANSPARENT MODE OFF - <n>