User manual

125
Figure 8.
Double-Clicking ‘MY Bluetooth Places’ should bring up a Window (Figure 9) that shows the connection. Notice
the connection is on Virtual Com Port 6 in this case. Record this port number and use it in place of the standard
COM1 or COM2 that your software normally uses to communicate with the printer. You can also find the virtual
port number under the Bluetooth Properties tab (Figure 10).
You should be able to communicate with the Boca with HyperTerminal, with our Customer program (Note: must
use the Driver version) or any other software that uses the COM ports. You do not have to setup the baud rate
or handshaking on the port - it is a virtual connection.
Figure 9.