User manual

120
WEP Security Mode – Allows the user to communicate through the network using WEP wireless encryption.
With WEP one can select 64 bit or 128 bit encryption. When the security encryption mode is chosen it will be
required to enter the “Pass Phrase” for the local wireless network. Some networks also enforce the use of a
default transmit key. If needed select one, else leave it set to “1”. Next the four security key values will have to
be entered to match those of the local network. Finally click on OK to have these values transmitted to the
printer (through the cable). The printer will reset and upon re-initialization it will establish wireless
communication with the local network. The handshaking involved in establishing wireless communication can
take up to 30 seconds.