Operator`s manual

a. Clean print head. Consult “Thermal Print Head” section.

b. Replace thermal head.

8. NO PRINT OUT

a. Check head cable for electrical connection at both ends

b. Check to make sure head cable is plugged in properly into the thermal head.

c. Replace the thermal head.

d. Replace the Main logic board.

9. PRINTER SKIPS TICKETS WHILE PRINTING

a. Check all electrical connections on the printer.

b. Check position and quality of black mark on the ticket stock.

c. Clean off opto eyes. Consult “Load Switch and Tear Opto” section.

d. Replace ticket tear opto.

e. Replace ticket load switch.

10. PRINTER SKIPS TICKETS AND DIES

a. See # 8.

Click here to return to >

Table of Contents