Operator`s manual

4
1.0 Introduction
The BOCA MINI series printers are direct thermal ticket printers with an integrated cutting
mechanism. This manual will provide the user with general information regarding printer set-up,
configuration and troubleshooting. Please read the important safety information section before
installation is conducted. Review the programming guide for additional details.
2.0 Unpacking the Printer
The printer is shipped in a ruggedized container. Please save packing material for future use.
Remove the printer and accessories from the box and inspect for obvious damage. If damage is
noticed, please report it immediately to BOCA.
Tel: [phone] Fax: [phone]
The following items should be in the box:
a) Ticket Printer
b) Hopper (if applicable)
c) AC power cord
d) Interface cable (optional)
e) Mounting Plate (optional)
Click here to return to > Table of Contents