Operator`s manual

15
8.2 Cutter Assembly
The BOCA cutter (BC2) system is a fully integrated cutter knife mechanism powered by a stepper
motor. The BC2 requires no adjustments and is rated for approximately 750,000 cuts. Please be
aware of the following:
Wait five seconds before feeding ticket stock into the printer after power up. During this time the BC2
cutter knife will move up and down. If ticket stock is fed into the printer before five seconds, a ticket
jam could occur.
The BC2 should be blown out with air periodically to prevent debris from building up inside the cutter
area. The required cleaning interval varies greatly depending on the quality of the ticket stock and
the amount of paper dust entering the cutter area.
BC2 CUTTER ASSEMBLY
Click here to return to > Table of Contents