Operator`s manual

Click here to return to > Table of Contents

8.1.3 Rubber Drive Roller (Platen)

The rubber drive roller should be cleaned once a year to prevent paper dust from building up on the

roller. Clean drive roller with a paper towel and alcohol.

1. Unlock the thermal head and tilt back to gain access to platen.

2. Clean the full length of the platen.

3. Rotate the platen clockwise and repeat step 2; continue in the same manner for

one full revolution of the platen.

4. Close or lock the thermal head. Printer in now ready for normal operation.

(NOTE: The platen may require more frequent cleaning in dusty environments

or when using inferior ticket stock.)

RUBBER DRIVE ROLLER

(PLATEN)

Click here to return to >

Table of Contents

Photo D

Head is installed wrong. Should not

be sitting on top of the cutter.