Operator`s manual

Two typical ticket formats and feed directions are shown below.
Black Mark
Underside of
Ticket
Cinema
5.50”
Black Mark Underside
of Ticket
Standard Ticket
Feed Direction
2.0”
or
3.25”
3.25”
2.0”
When loading 5.50” long ticket stock the black timing mark should be closest to the leading edge of
the ticket (the first part that goes into the printer).When loading 2.0”” long ticket stock the black timing
mark should be furthest away from to the leading edge of the ticket (the first part that goes into the
printer).
Click here to return to > Table of Contents
6.0 Configuration
The Lemur series printer is factory configured for a variety of customer requirements.
For a comparison of the different electronics packages, refer to the BOCA Systems website under the
BASIC section.
For a listing of configuration choices, refer to the BOCA Systems website under the
SPECIFICATIONS section.
Printers are configured with a reverse adjustable paper guide (RADJW) set to the customer specified
width or optional adjustable paper guide (ADJ4, ADJW, ADJ2 & RADJ4). To change the ticket width
setting, refer to section 9.1.4.
Click here to return to > Table of Contents
8