Operator`s manual

6. Now click on the “Select Printer Operation” drop-down arrow and chose the appropriate test program.
If your printer has FGL firmware then chooses “FGL Test Ticket” or if your printer had HP firmware
then choose “PCL Test Ticket”. If you are going to be sending a text commands then see
Appendix F.
If you are going to configure your Wi-Fi connection then see
Appendix G.
7. Once the Test Ticket selection box comes up, click on the OK button to print out a ticket. The printer
will print out an interface test ticket.
8. You may also print more than one ticket by repeating steps # 5 & 6 but this time change number of
tickets you want printed.
31
Above sample FGL ticket was printed on a 2” x 5.5” (concert) ticket using a RADJW-2” 200dpi FGL printer.