Operator`s manual

18
9.3.2 Logic Board (Installation)
1. Installed the logic board into the printer.
2. Install the four 3/16” head screws that hold the logic board onto the cabinet and tighten.
3. Attach connectors going to the main logic board.
4. Install the electronics cover or rear access panel.
9.4 General Cleaning
The interior of the printer should be cleaned whenever there is a visible accumulation of dust. Use a small
vacuum for cleaning. Be careful not to jar any of the printer’s parts loose.
10.0 Spare Parts List
# Part Number Qty Description
1 422557-25 1 Cable Ribbon, Thermal Head
2 420881Z-1 1 Cover Front, Lemur
3 423552-L 1 Cutter Assembly
4 423759 2 Display Holder
5* P50-1003 1 Drive Belt, 102T (for 300dpi)
5 P50-1017 1 Drive Belt, 98T (for 200dpi)
6* P51-1011 1 Drive Pulley, 30T (for 300dpi)
6 P51-1007 1 Drive Pulley, 20T (for 200dpi)
7 P51-1014 1 Drive Pulley, 20T (for 200dpi & 300dpi)
8 423480Z 1 Upper Exit Deflector
8* 423480Z-VL 1 Upper Exit Deflector (vertical mount Lemur only)
9* 423485-VL 1 Lower Exit Deflector (vertical mount Lemur only)
10 423192 1 Ground Strap
11 423793 1 Energy Star Decal
12 422888-115 1 Transformer (110VAC)
12* 42288-230 1 Transformer (230VAC)
13 FGLZ46 1 Main Logic Board (Standard)
13* FGLZ46-E 1 Main Logic Board (Ethernet option)
14 P46-110 1 Power board, 110VAC
14* P46-220 1 Power board, 220VAC
15 423764 1 Opto Detector Assembly (opto)
16 423760-L3B-1 1 Platen (RADJW, ADJ2 & ADJW)
16* 423760-L4B-1 1 Platen (ADJ4 & RADJ4)
17 423789 1 AC Filter
18 2003 1 Print Head (200dpi RADJW, ADJ2 or ADJW)
18* 3003 1 Print Head (300dpi RADJW, ADJ2 or ADJW)
18* 2004 1 Print Head (200dpi ADJ4 & RADJ4)
18* 3004 1 Print Head (300dpi ADJ4 & RADJ4)
19 423496 1 Head Mounting Plate
20 422590 1 Stepper Motor
21 P28-1020 1 Switch, Ticket Load
22 AC161A5 1 LCD Display
23 423236-2 1 Take Out Head Cam Lock
24 5316H 1 Control Panel Decal
25 421932-DSP 1 Fill-in Plate, Display
26 423559Z 1 RFI Cutter Shield
27 422521 1 Electronics Box, Lemur & Lemur-K
28 423565 1 Dust Cover, Cutter
29 P62-1006 1 Anti Static Brush
30 422521Z 1 Electronics Box, Lemur-2 & Lemur-2K
31 423792 2 Shoulder Bearing, Platen
32 423790 1 DC Out Cable, Power Board
33 423791 1 AC Out Cable, Power Board
34 423767 1 UL Cover, Power Board
35 P45-1009 1 Bearing (Large)
* 420881Z-2 1 Cover, Lemur
* 420881Z-Plus 1 Cover, Lemur-S
* 4208812Dual-2 1 Cover, Lemur-2
* 4208812Dual-2 1 Cover Front, Lemur-2
* 421623 1 Hopper, 2” wide ticket stock (cutter Lemur-S)
* 422113 1 Hopper, 2” wide ticket stock (cutter Lemur & Lemur-2)
* 421623-5M4 1 Hopper, 2.5” to 4” wide ticket (cutter Lemur, Lemur-S & Lemur-2)
*Customer dependent and not shown in photos