VBar Control Device Manual
Table Of Contents
- Benefits at a Glance
- Introduction
- General Safety Precautions
- Package Contents
- Transmitter Controls and Features
- Basic Transmitter Operation
- How to turn the VBar Control on and off
- The Main Screen and the Easy Dialog System
- Basic VBar Control Setup
- Transmitter Setup
- Application Setup
- How to change the Stick Mode and adjust the Stick Tension, how to change the Stick Length
- How to use VBar Control as a USB Game Controller
- Binding a VBar Control Satellite Receiver
- Battery Charging
- Tips for using your VBar Control Transmitter
- VBar Control Satellite Receiver
- Updating and Enhancing your VBar Control Transmitter
- Recycling VBar Control and the Rechargeable Battery
- Technical Data
- Getting Support and Service for your VBar Control
- Compliance Information for the U.S., Europe and Other Countries
- FCC Grants
6
Benefits at a Glance
■ Setup, programming and adjusting of VBar-controlled
models accomplished directly via VBar Control radio.
■ No computer, control panel or smartphone necessary.
■ Instant access to almost every ight parameter from
the transmitter controls, even in ight.
■ Easy programming for new helicopters via the familiar
VBar setup wizard.
■ New ESC setup wizard for programming all types of
speed controllers.
■ Bank switching with three banks.
■ Real time logging and real time vibration analysis read-
able from the transmitter.
■ Several telemetry functions are available, such as volt-
ages, current, rpm, speed, and power consumption of
the batteries (may need additional hardware).
■ Storage of event log les like VBar event log, VBar
Control event log, GPS way points, voltage/current
logging etc.
■ Multiple timer functions available with warnings and
reminders via sound, voice, or vibration output.
■ Wireless buddy boxing with two VBar Control radios,
fully congurable.
■ Easy bind process, allows bind and y of any model
equipped with VBar Control (e.g. a buddy’s heli) with
your own transmitter (Model Sharing).
■ Software updates via internet using a simple VBar
Control Manager app and the web browser.
■ Option for adding new features via apps, simple instal-
lation via internet, supports both Windows and Mac OS
X-PCs, no drivers needed.
■ Additional airplane software will be available in summer
2014.
■ 80 Channel 2.4 GHz FHSS bidirectional ight con-
trol, programming/setup and telemetry remote control
system.
■ VBar Control Satellite connects directly to VBar ybar-
less controller via 2.4GHz VBar-Link protocol.
■ Unlimited model memory.
■ Virtually unlimited number of control channels. High
range, low latency, antenna diversity both on transmit-
ter and receiver.
■ Intelligent antenna monitoring and management.
■ XXtra Bright Graphic Display featuring high contrast
and ambient light sensor to automatically control the
display brightness, making it equally well readable in
bright sunlight and in the dark.
■ Easy Dialog System with rotary dial for convenient and
safe inputs, with optical, tactile and acoustic feedback.
■ Precision gimbals with four ball bearings, fully adjust-
able.
■ Collective stick equipped with optional throw limiter.
■ Fully equipped with four 3-position-switches, two
quick-break-switches and two rotation knobs, all fully
programmable.
■ Delicate rubber lining for comfortable, slip-free and
safe holding.
■ 3-point neck-strap attachment, for optimum balance.
■ Large 2 Watt loudspeaker for alarms and voice output.
■ Vibration alarm (adjustable).
■ Internal 8 MB ash memory.
■ Memory accessible as a USB memory stick, no drivers
needed.
■ 4.000 mAh Lithium Polymer battery allows for long run
times.
■ Charge through USB connector or built-in charger.
■ Power supply for fast charging included.