VBar Control Device Manual

19
Technical Data

Working temperature range 0 °C to +40 °C
32 °F to 104 °F
Current consumption Standby 190 µA
Normal 280 mA
Maximum 1,200 mA
Weight 880 g

Working temperature range -5 °C to +45 °C
23 °F to 113 °F
Current consumption Receive max. 70 mA
Transmit max. 80 mA
Supply voltage 3.5 to 8.4 V (2S LiPo)
Weight 8 g

Working temperature range -5 °C to +60 °C
23 °F to 140 °F
Current consumption ca. 120 mA
Supply voltage 3.5 to 8.4 V (2S LiPo)

Working temperature range 0 °C to +50 °C
32 °F to 122 °F
Current consumption ca. 80 mA
Supply voltage 3.5 to 8.4 V (2S LiPo)
Getting Support and
Service for your VBar
Control

Mikado Model Helicopters offer free warranty repair or re-
placement during the legal warranty period applicable only
if VBar Control is faulty during or after use according to the
specication and this manual, and based on the regula-
tions of Mikado Model Helicopters.
Mikado Model Helicopters will charge cost for repairs or
replacements necessary e.g. because of improper use, af-
ter the warranty period, and without proof of purchase pro-
vided.
Warranty will be limited to the VBar Control itself and does
not cover other components on the model like servos,
power units, the model itself and especially non-Mikado
products.
Mikado Model Helicopters do not take responsibility for
any physical damage or physical injury as well as loss of
use or data saved on the device or any similar claim.
After the warranty period has expired, or in case the dam-
age was not a warranty issue, Mikado Model Helicopters
will repair VBar Control with costs. We will provide a repair
estimate to the customer.
Repairs will only be made if VBar Control can be used
safely again in the future.
Please note that costs of some repairs might exceed the
value of the device and might not be economically sensible.
☝ Attention Legal warranty periods may differ depending on
the laws applicable in the country you live in. Please ask
your local dealer/distributor for further details.
☝ Attention Make sure you save the les on your VBar Con-
trol to your computer before you send it in for warranty or
general repair. The device may be reset and re-installed at
the service shop, causing loss of all data saved on the in-
ternal memory.

Mikado Model Helicopters provides extensive worldwide
after-sales service on the forums at the support web site
www.vstabi.info as well as via e-mail through service@mi-
kado-heli.de.
Spare parts and accessories for your VBar Control are
available at www.mikado-heli.de.
Compliance Information
for the U.S., Europe and
Other Countries

☝ Attention This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in ac-
cordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to cor-
rect the interference at his own expense.
☝ Attention Changes or modications not expressly ap-
proved by the party responsible for compliance could void
the user’s authority to operate the device.

☝ Attention This equipment complies with the regulations of
R&TTE directive 1999/5/EC. It carries the CE sign which
demonstrates conformity and is accepted within the EU as
well as additional countries such as Sweden, Norway, Est-
land and Switzerland for example. VBar Control may be
sold and used in these countries. Please note that it is sole-
ly in the user’s responsibility to put radio equipment into
service.