VBar Control Device Manual
Table Of Contents
- Benefits at a Glance
- Introduction
- General Safety Precautions
- Package Contents
- Transmitter Controls and Features
- Basic Transmitter Operation
- How to turn the VBar Control on and off
- The Main Screen and the Easy Dialog System
- Basic VBar Control Setup
- Transmitter Setup
- Application Setup
- How to change the Stick Mode and adjust the Stick Tension, how to change the Stick Length
- How to use VBar Control as a USB Game Controller
- Binding a VBar Control Satellite Receiver
- Battery Charging
- Tips for using your VBar Control Transmitter
- VBar Control Satellite Receiver
- Updating and Enhancing your VBar Control Transmitter
- Recycling VBar Control and the Rechargeable Battery
- Technical Data
- Getting Support and Service for your VBar Control
- Compliance Information for the U.S., Europe and Other Countries
- FCC Grants
10
Transmitter Controls
and Features
■ Gimbals
■ Adjustable sticks
■ Switches 1-6
■ Rotating knobs 1+2
■ Easy Dialog System Dial (EDS)
with LED ring
■ XXtra Bright Graphic Display
■ Ambient light sensor
■ 3-point neck-strap attachment
■ Speaker
■ Rubber grip lining
■ Antenna
■ Carrying handle
■ USB connector with
protective rubber cover
■ Charging connector
and reset button with
protective rubber cover
■ Transmitter battery (installed)
■ Stick tensioners
■ Collective stick brake & spring
■ Main board
USB connector with
protective rubber cover
Charging connector
and Reset button with
protective rubber cover
Stick tensioners
Main board
Collective stick
brake & spring
Transmitter battery (installed)
Gimbals
Adjustable sticks
Antenna
Rubber grip
lining
XXtra Bright Graphic Display
Ambient light sensor
3-point neck-strap
attachment
Speaker
Easy Dialog System Dial
(EDS) with LED ring
Switches 1-3
Switches 4-6
Rotating knobs 1+2
Carrying handle