Quick Start Guide

1. Items needed for rst installation
On rst installation, you will need:
• VBar NEO with built in VBar Control Satellite and a
VBar Control radio
• Power supply (BEC or receiver battery).
• Helicopter with servos installed, but not yet
connected! Only digital servos allowed!
• Pitch Gauge (swash plate levelling tool)
• For updates and extensions of VBar NEO you
need the VBar Control Manager software which
you can download conveniently from www.vstabi.
info as well as a Mini USB wire and a Boot Plug.
Contents
VBar NEO with built-in VBar Control Receiver, USB wire, Boot
Plug, Gyro Pad, external gyro sensor (* optional).
*
*