Full Product Manual

18
SMART CONTROL Wi-Fi WALL STATION (if applicable)
This Smart Control
©
Wall Station allows operation of the light and door using the buttons, but it does much
more when paired with our Android or iOS application. It can operate your garage door, manage your family’s
access, control lights and inform you of people coming and going, all while you are on the go.
Requirements
To use the Smart Control Wall Station with the app you will need:
• a Wi-Fi network with Internet connectivity,
• a strong Wi-Fi signal in the garage where you are installing the Smart Control Wall Station and
• an Android or iOS phone.
See page 29 for instructions on downloading and installing the Mighty Mule Wi-Fi Smart Control
©
APP.
Test Wi-Fi Signal Strength
It is paramount that the Smart Control Wall Station receives
strong signal from your home’s Wi-Fi router.
Check the Wi-Fi signal from you home router. To do this,
take your smart phone, connect it to your Wi-Fi network and
then place your phone on the wall next to the Wall Station.
If you have 2 or 3 bars on your phone for the Wi-Fi network,
the signal is strong and you can proceed. If not, use one of
these options to extend your Wi-Fi network’s range.
• Move your Wi-Fi router closer to the garage.
• Purchase a Wi-Fi range extender.
• Relocate your wall station to a spot where the signal is
stronger.
Strong Wi-Fi signal
Smart Control Wall Station will
connect to your Wi-Fi network.
Weak Wi-Fi signal
Smart Control Wall Station may
not connect to your Wi-Fi network.
No Wi-Fi signal
Smart Control Wall Station will
not connect to your Wi-Fi network.
When the garage door operator installation is complete and power has been connected you will
 nd instructions on how to test the wall station on page 20 and how to use the features of the wall
station on page 27.