Full Product Manual

The Mighty Mule MM9545M and MM9434K come with the MMW200 WiFi wallstation and the MM9333H

comes with the MMW100 wallstation without WiFi capability. Installation is the same but functions are

different. Illustrations below will highlight the differences.

INSTALLING THE WALL STATION

Choose Placement of Wall Station

The Wall Station is typically mounted inside the garage on

the wall adjacent to the door into the house. It also can be

mounted in any other convenient place meeting the below

requirements.

NOTE: For Smart Control Wall Stations the composition of

your wall can adversely affect the strength of the Wi-Fi signal.

The best spot to mount the Smart Control Wall Station is on a

drywall-covered wall framed with wood studs and  lled with

blown-in or batt insulation.

If possible, avoid af xing the Wall Station:

• to solid brick or concrete walls,

• to metal studs or walls with metal inside and

• on top of or near AC electrical lines.

Mount Smart Control Wall Station

at least 5 feet above oor level.

MMW200 MMW100

Vacation Lock

WiFi Link Button

Reset Button

WiFi Status LED

Vacation Lock

Light Control Buttons

( ) Turn light on/o

( – ) Dim the light

( + ) Brighten the light

NOTE: 22 AWG 2-conductor wall station and photo beam wire is supplied with the opener, Use this wire or the

installation’s pre-wiring.

UL NOTE: All low voltage Class 2 cable used with this opener must be UL Listed Type CL2, CL2P, CL2R, or CL2X

or other cable with equivalent or better electrical, mechanical, and  ammability ratings.