SDS

Hoffman Plastic Compounds SDS Page 4 of 11
June 1, 2015 HPC-SDS v2.58 – 6/10/15 June 1, 2015 HPC-SDS v2.58 – 6/10/15
Compounded PVC is in inert material in its normal state in either pellets, or granules. All
the ingredients and / or components listed below are encapsulated within the PVC matrix:
Component
% Weight
CAS #
Additional Information
Polyvinyl Chloride Polymer
45% - 80%
9002-86-2
Inert Fillers
0% - 40%
1317-65-3
Limestone
Heat Stabilizers
3% - 10%
Mixture
Organometallic compounds of
barium and/or Calcium Zinc
Plasticizers
0% - 60%
Mixture
High molecular weight esters
Colorants
0% - 5%
Mixture
Organic & Inorganic colorants
1. Inhalation
a. No adverse effects anticipated under normal conditions if adequately
ventilated. However, if exposure occurs, remove the exposed individual to
fresh air. Obtain medical attention immediately if irritation persists.
2. Skin Contact
a. No adverse effects anticipated under normal conditions. Flush with water to
remove material from skin. Obtain medical attention if irritation persists.
3. Eye Contact
a. In the event of eye irritation, flush eyes with water for at least 15 minutes. Do
not rub eyes. Obtain medical attention if irritation persists.
4. Ingestion
a. No effect expected. If large amounts are ingested, seek medical attention.
Only induce vomiting at the instructions of a physician.
3. Composition / Information on Ingredients
4. First Aid Measures
5. Fire Fighting Measures