SDS

Hoffman Plastic Compounds SDS Page 11 of 11
June 1, 2015 HPC-SDS v2.58 – 6/10/15
OSHA 29 CFR 1910.1017
This compound may contain trace levels (<0.001%) of VCM. Under normal working
conditions with adequate ventilation, neither the OSHA-PEL of 1 ppm (8-hr TWA), nor
the OSHA-STEL (5.0 ppm) should be exceeded. The workplace should be monitored and
if the level exceeds any of the PELs or action levels, refer to 29 CFR 1910.1017.
IMPORTANT
The information and data herein are believed to be accurate and have been compiled from
sources believed to be reliable. It is offered for your consideration, investigation and
verification. Buyer assumes all risk of use, storage and handling of the product in
compliance with applicable federal, state, and local laws and regulations.
PREPARED BY: Roland Hoffman
June 1, 2015
REVISION NUMBER: 2.75
REVISED BY: Roland Hoffman
June 22, 2015
The date and recommendations presented herein are based upon a review of HOFFMAN
PLASTIC COMPOUNDS, INC. files, published SDS’s, and standard toxicological
reference sources. HOFFMAN PLASTIC COMPOUNDS, INC. makes no guarantee or
warranty, either expressed or implied as to the accuracy or completeness of these data
and recommendations. This information solely relates to the material designated on this
SDS, therefore the data contained in this SDS may not be valid towards the combination
with any other materials nor within any process.
16. Other Information