Installation manual

4-4

No Diving or Jumping. Observe all Safety Rules

GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS

ASSEMBLING THE POOL FRAME

Secon

b. You must now install the top ledge covers (one on

the left side and one on the right side of each top

ledge). Fit the finishing pieces onto the openings of

the top ledges. (Image 10)

c. Start the top ledge cover installation by positioning

the piece into an angle of 45 degree to insert the

interior clip into the openings of the top ledge.

Pivot the piece and insert the other side into the

openings of the top ledge. (Image 11)

d. Install the crown at the top of the upright. Insert

the central coupler into the holes and clip on the

two extremities behind the upright. (Image 12)

e. Install the logo. (Image 13)

C. CONT. INSTALLATION OF TOP LEDGE AND LEDGE COVERS