Installation manual

4-1
No Diving or Jumping. Observe all Safety Rules
Secon
4
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL FRAME
1. Install the uprights - round section
a. The wall joint is hidden behind the upright on most
pools. This assures that the skimmer and skimmer
return holes are not obstructed.
b. Insert an upright into the bottom plate. Ensure that
the upright is correctly inserted into the bottom
plate. (Image 1)
c. Proceed with the installation of all the uprights that
remain for the round section of the oval pool.
(Images 2 & 3)
A. INSTALLATION OF THE UPRIGHTS - ROUND SECTION
Important Note:
Use the ridges in the pool wall to make sure the upright
column is straight up and down.
1
2
3
Important Note:
Ensure to leave a gap between the two bottom rails.
See Diagrams:
Please refer to your pool’s footprint for gap measurement.