Installation manual

No Diving or Jumping. Observe all Safety Rules
2-6
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL BASE
Secon
2
A. CONT. INSTALLATION OF OF BOTTOM PLATES AND BOTTOM RAILS
c. Spread the sand inside the pool area. Make sure
not to spread the sand onto or beyond the bottom
rails. Compact the sand manually or mechanically.
(Image 12)
1. Installation of uprights - straight section
a. Insert all the straight section uprights into the
vertical sleeves. Slide the upright all the way down
to the bottom plate. Ensure that the upright is
correctly inserted into the bottom plate. (Image 13)
(You will insert the uprights for the round section
after the wall installation).
2. Proceed to Section 3 -
Assembling the Pool Wall
12
B. INSTALL UPRIGHTS FOR STRAIGHT SECTION
13