Installation manual

No Diving or Jumping. Observe all Safety Rules

2-1

GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS

ASSEMBLING THE POOL BASE

Secon

1. Bottom plates - straight section

a. To install the inferior bottom plate in the straight

section, you need to remove the centralplate of the

bottom plate with a hammer. (Image 1)

b. Insert the end of each bottom rail into the bottom

plate. Leave a gap between the ends of the bottom

rails. (Image 2 & 3)

c. Insert the assembled bottom plate with bottom rail

into the vertical sleeves. It is preferable to be two

persons to accomplish this step. (Image 4)

A. INSTALLATION OF BOTTOM PLATES AND BOTTOM RAILS

See Diagrams:

Please refer to your pool’s footprint for gap measurement,

Important Note:

PLEASE SEE NOTE ON NEXT PAGE IN REGARDS TO THE

DIFFERENT LENGTHS OF BOTTOM RAILS.