Installation manual

4-2 No Diving or Jumping. Observe all Safety Rules

GENERAL INSTRUCTIONS - YARDMORE OVAL POOLS

ASSEMBLING THE POOL FRAME

Secon

B. INSTALLATION OF TOP LEDGES AND LEDGE COVERS

2. Install top ledges - Round Section

a. The back ledge cover installation completes the

functionality of the upright by linking together the

upright, the wall and the stabilizer. Insert the back

ledge cover in the upright head openings. Lock the

hooks into the openings along with the screws on

the top ledge. (Image 3)

b. Place the top ledges between the uprights. The

outside end of the top ledge must be inserted into

the opening on top of the upright. Partially insert 1

inch screws on top. (Image 4)

c. Evenly distribute the space between the top ledges

to center them between the uprights.

d. Make sure to level the two axes of the uprights

by pushing slightly inwards before tightening the

screws permanently. (Image 5)

Important Note:

Ensure to leave a gap between the two stabilizers.

See Diagram:

Please refer to your pool’s footprint (Section 1, last page)

for gap measurement.

Important Note:

We suggest that you install all the top ledges on the

wall before attaching them.