Installation manual
4-1No Diving or Jumping. Observe all Safety Rules
A. INSTALLATION OF THE UPRIGHTS - Round Secon
GENERAL INSTRUCTIONS - YARDMORE OVAL POOLS
ASSEMBLING THE POOL FRAME
Secon
4
1. Install the uprights
a. The wall joint is hidden behind the upright on most
pools. This assures that the skimmer and skimmer
return holes are not obstructed.
b. Insert the bottom of the upright onto the bottom
plate. Make sure that the hooks at the bottom of
the upright are inserted into the openings in the
bottom bottom. (Image 1)
c. There are no screws needed for this assembly.
1. Install stabilizers
a. Install the stabilizers on the wall while ensuring to
leave a gap between each end. (Image 2)
Important Note:
Use the ridges in the pool wall to make sure the upright
column is straight up and down.
Important Note:
Ensure to leave a gap between the two bottom rails.
See Diagram:
Please refer to your pool’s footprint (Section 1, last page)
for gap measurement.
1
B. INSTALLATION OF TOP LEDGES AND LEDGE COVERS
2