Installation manual

2-2 No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - YARDMORE OVAL POOLS
ASSEMBLING THE POOL BASE
Secon
2
2. Bottom plates & rails - round section
a. Continue the installation of the bottom plates of the
round sections. Insert the end of each bottom rail
into the bottom plate. Leave a gap between the
ends of the bottom rails. (Images 4 & 5)
A. INSTALLATION OF BOTTOM PLATES AND BOTTOM RAILS
See Diagrams:
Please refer to your pool’s footprint (Section 1, last pages)
for gap measurement,
4
5
Important Note:
There are three types of bottom rails. Bottom rails for the straight
section, bottom rails for the round section and bottom rails for
the end of the straight section (Transition).
To differentiate which bottom rail is which;
Straight Section: will measure 42" in length
Transition Section: will measure appx. 53" in length
Round Section: will be the longest measure