Instructions / Assembly

Diamond Dual Instruction Manual 13

Step 1

Remove the Control box from the Battery Box by removing the

three screws as shown in Illustration A.

Step 2

Mount the Battery Box using the screws (provided) or another

secure mounting method. The battery/control box must be

mounted at least 3 feet above the ground to protect it from rain

splash, snow, etc., and at least 3 feet from an AC power source

to prevent electrical interference.

Step 3

Slide the battery into position with the terminals at the TOP

as shown in Illustration B.

Mount the Battery Box / Control Box

This device complies with FCC rules Part 15. Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept an interference that may cause undesired operation.

Transmitter distance may vary due to circumstances beyond our control. NOTE: The manufacturer is not

responsible for any radio or TV interference caused by unauthorized modiﬁcations to this equipment. Such

modiﬁcations could void the user’s authority to operate the equipment.

Illustration B

Battery Box

Control Box

Illustration A

1. KEEP CLEAR! Gate may move at any time.

2. Do not allow children to operate gate or

play in gate area.

3. This gate is for vehicles only. Pedestrians

must use a separate entrance.

Moving Gate Can Cause

Injury Or Death

WARNING

Control Box

Piece of Wood

for Mounting

Screw Placement Guides