Instructions / Assembly

viii Diamond Dual Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
!
Warning signs (2 enclosed) to be installed on each side
of the gate (3–5 feet above the bottom of the gate).
Product identification and manual operation instruction
label (1) installed on right hand side of battery box.
Logo labels (4) installed on each side of operator housing.
Warning label (1) installed on control box.
Maximum Gate: 500 lb. (226.7 kg); 16 ft. (4.9 m)
Voltage: 12 Vdc; Frequency: 0 Hz; Power: 30 W
Class I & II Vehicular Swing Gate Operator.
Conforms to UL STD 325
2000XLS SERIES DC Swing Gate Operator
P/N MMDIA30D
9901178
TO MANUALLY OPEN AND CLOSE THE GATE:
1. Turn control box power switch OFF.
2. Disconnect front or rear mount from mounting bracket.
3. Pull operator away from mounting brackets and move gate.
Disconnect operator ONLY when the control box power
switch is OFF and the gate is NOT moving.
Serial Number: MMDIA30D -0000000
MMDDYY
GTO Access Systems, LLC - Tallahassee, Florida USA
®
DIAMOND
dual
automatic gate opener
ANNIVERSARY EDITION
1-800-543-GATE | mightymule.com
MMDIA30D
MOVING
GATE!
CAN CAUSE INJURY OR DEATH
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use
separate entrance.
®
1-800-543-GATE | mightymule.com
DIAMOND
automatic
gate opener