Instructions / Assembly

1
OPENER PARTS INCLUDED
WARNING
!
Child can be pinned under automatic garage door.
Death or serious injury can result.
• Never let child walk or run under moving door.
• Never let child use door opener controls.
• Always keep moving door in sight.
• If person is pinned, push control button or use
emergency release.
• Test door opener monthly:
Refer to owner’s manual.
Place 1-1/2” object (or 2x4 laid at) on oor.
If door fails to reverse on contact, adjust opener.
If opener still fails to reverse door, repair or replace opener.
Do not remove or paint over this label.
Mount wall control out of child’s reach (at least 5 feet above oor)
Place next to wall control.
©2015
HANGING BRACKETS
(ANGLE IRON)
QTY–2
12 VOLT
BATTERY
(included with MM9545M)
OPENER POWER HEAD
DOOR ARM
2 PIECES
RAIL SECTIONS
QTY-4
DRIVE BELT
BELT TENSIONING TOOL
RAIL COUPLERS
QTY–3
WARNING
SIGN
3/8” Ratchet and 1/2", 3/8”
& 7/16" Sockets (thin-walled)
6-Foot Step Ladder
Wire
Labels (x6)
5/32” Bit for 1/4”
Lag bolt pilot holes
3/16” Bit for 5/16”
Lag bolt pilot holes
Drill
Pliers
Level
3 ft.-2x4”
Adjustable
Wrench
Pencil
Safety Goggles
Cutting
Disc
Hammer
Tape
Measure
Philips Head
Screwdriver
Tool Vice
Flat Head
Screwdriver
Wire
Stripper
Hack Saw
7/16”
wrench
1/2”
wrench
3/8”
wrench
Short Socket
Extension
Label
Label
RECOMMENDED TOOLS