Instructions / Assembly

27
USING THE WALL STATION
FLIP THE LARGE COVER UP TO ACCESS
PROGRAMMING BUTTONS.
LOCK RESET
WiFi LINK
MMW200
FLIP THE LARGE COVER UP TO ACCESS
PROGRAMMING SWITCH.
LOCK
UNLOCK
MMW100
PRESS THE LIGHT BUTTON TO TURN
THE LIGHT ON OR OFF.
THE LIGHT WILL STAY ON UNTIL THE
LIGHT BUTTON IS PRESSED OR THE
OPENER IS CYCLED.
DIMMER ON/OFF BRIGHTER
Vacation Lock for Additional Security
1 Open the wall station’s cover to access the Programming
Buttons. Press the LOCK ( ) button on the MMW200 and
slide the LOCK SWITCH to ( )on the MMW100 to prevent
remote controls from opening the door after the door is
completely closed. When the Vacation Lock is activated, the
remote controls can close the door, but not open it. The door
can still be opened or closed by using the wall station’s UP/
DOWN pushbutton.
NOTE: To signal that the vacation switch is locked, the
opener’s light will  ash and the alarm will sound  ve times if
a remote control is activated in an attempt to open the door.
2 Press the wall station’s LOCK ( ) button again on the
MMW200 and slide the LOCK SWITCH to ( ) on the
MMW100 to unlock and return the operator to normal
operation.
NOTE: The Vacation Lock can be set and reset using the
Smart app on a smart phone when used with the MMW200
Smart control wall station.
Wall Station Reset for WiFi Wall Station (MMW200)
If you change your home router or password you will need to
RESET your Wall Station.
1 To do a Wall Station RESET press the WiFi Link ( ) button
for 10 seconds, the RED LED blinks and then turns solid
RED. The Wall Station is now ready to re-link to a new or
updated home router.
2 To re-boot the Wall Station for software updates, press the
RESET ( ) button.
Controlling the Opener’s Light
1 The opener’s light can be turned ON by pushing the wall
station’s light on/off ( ) button. The light will stay on until
the button is pressed again or the opener is cycled.
2 To DECREASE the light brightness, press the dimmer ( – )
button.
3 To INCREASE the light brightness, press the brighter ( + )
button.