Instructions / Assembly

ManualsBrandsMighty Mule ManualsDoors & Windows3/4 HP DC Smartphone Compatible Garage Door Opener with Built-In LED Lighting and Ultra-Quiet Belt Drive

INSTALLING AND PROGRAMMING KEYPAD (if applicable)

PROGRAMMING A KEYPAD CODE TO THE GARAGE DOOR OPENER

DELETING A KEYPAD CODE

Press and release the opener’s LEARN BUTTON.

Note: Pressing longer than 1 second will erase all

programming.

While the RED LED is lit, enter a 1-6 digit

code into the keypad. Then PRESS and

HOLD the keypad’s up/down ( ) button

until the opener BEEPS and the light

BLINKS once.

RED LED

Press

LEARN

button

Repeat Steps 1 & 2 for any additional

keypad codes.

To delete a keypad code that you no longer want

follow the same steps above. The opener will

recognize the code and delete it from memory.

The RED LED and LIGHT will blink 4 times to

show the code was successfully deleted.

HINGED COVER

PROTECTS THE

KEYPAD

SOFT BLUE LIGHTS

ILLUMINATE THE KEYS

FOR NIGHTTIME USE

LIGHT BUTTON TURNS THE

GARAGE DOOR OPERATOR’S

LIGHT ON AND OFF WHEN THE

DOOR IS OPEN

UP/DOWN ( ) BUTTON STAYS ACTIVE FOR

30 SECONDS AFTER A CODE IS USED SO THE

OPENER CAN BE STOPPED OR REVERSED

TEN KEYS ENTERING

1-6 KEYPAD CODES

USING NUMBERS OR LETTERS

KEY FEATURES:

DESCRIPTION:

To activate the garage door opener, the user enters their unique 1 to 6 digit long code on the unit’s keypad

and presses the up/down ( ) button. For up to 30 seconds after the last activation, the keypad can be

re-triggered by simply pressing the up/down ( ) button again. This allows the user to stop or reverse the

opener quickly, without having to re-enter their code.

The keypad has built-in lighting for use at night or in dark areas. The clear silicone keys are back-lit with a

pleasing blue glow. Pressing any key will activate the back-light.

The keypad lockout timer will disable the keypad after 10 unsuccessful activations. The keypad must remain

idle for 30 seconds before new attempts.

MOUNT THE KEYPAD

INCLEAR VIEW OF THE

DOORWITH THE TWO

SCREWS SUPPLIED

USE THE SCREWS

ANCHORS SUPPLIED

IF REQUIRED

WALL MOUNTING:

IMPORTANT: Batteries must be installed before programming can begin. See page 31.

Wood Screw

Drywall Anchor

HARDWARE SUPPLIED