Product Manual

MM562 Installation Instructions 21
Power Cable from the
Master Operator Arm
RECEIVER
GTO RCVR.
WHT
BLU
BRN
ORG
RED
BLK
GRN
COM
GRN
BLK
RED
CYCLE
SAFETY
EXIT
SHADOW
OPEN
EDGE
COM
MASTER OPERATOR
CONTROL INPUTS
CLOSE
EDGE
Step 6
Insert the stripped power cable wires into the appropriate
terminals on the MASTER OPERATOR terminal block.
The green wire should be inserted into the GRN terminal,
the white wire into WHT, the blue wire into BLU, brown
wire into BRN, the orange wire into the ORG, the red
wire into the RED, and the black wire into the BLK
terminal.
Tighten the set screws against the end of the wires.
Correct
Wire
Terminal
Block
Wrong Wrong
Exposed strands
of wire
Screwed into
wire insulation
Connecting Opener Power Cables
MASTER Operator
Step 7
Insert the stripped wires of the power cable into the
appropriate terminals on the 2ND operator terminal
block. The green wire should be inserted into the GRN
terminal, the white wire into WHT, the blue wire into
BLUE, brown wire into BRN, and the orange wire into
the ORG terminal, red wire into RED, and black wire
into BLK.
Tighten the set screws against the end of the wires.
SECOND Operator
Power Cable from the
Second Operator Arm
WHT
BLU
BRN
ORG
RED
BLK
GRN
WHT
BLU
BRN
ORG
RED
BLK
GRN
COM
CYCLE
COM
LOCK
PWR
AUX
RLY
CONTROL
OUTPUTS
MASTER OPERATOR2ND OPERATOR
CON
GTO
LOCK
AUX