Product Manual

18 MM260 Installation Instructions
If you have a question about any special order item, call 1-800-543-4283
Accessories are Available From Your Retail Store (con't)
The contents of all material available on this installation manual are copyrighted by GTO Access Systems, LLC (“GTO”), unless otherwise indicated. All rights are reserved by GTO, and content may not be
reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior, written permission of GTO. Any reprinting of GTO publications is by permission only.
Copyright infringement is a violation of federal law.
Mighty Mule¨, E-Z Gate¨, GTO¨, “Dual Sense Technology” are registered trademarks of GTO Access Systems, LLC, America’s DIY Automatic Gate Openers is a trademark of GTO Access Systems, LLC and
are the exclusive property of GTO Access Systems, LLC (“GTO”).
All rights are reserved by GTO, and these marks may not be used, in any for without the prior, written permission of GTO.
Replacement Transformer (RB570)
Standard 18 volt, 2260 mA, AC transformer for maintaining the battery with the Mighty Mule gate operator.
Garage Door Receiver (RB709U-NB)
The Garage Door Receiver allows you to use the same 2 button Mighty Mule entry transmitter to operate your gate operator
and your garage door operator. Compatible with most garage door operators.
Driveway Alarm (FM231)
This device alerts you of vehicles entering your driveway (with or without an automated gate). The indoor base station signals
you with a door chime when a vehicle passes the driveway sensor.
Wireless Driveway Vehicle Sensor (FM130)
Automatically activates gate operator “Hands-Free” when a vehicle exits the property. 100 ft. range between transmitter and
receiver. Easy installation.
Wireless Entry Intercom / Keypad (FM136)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows owner to give up to
25 programmable entry codes to family, friends or approved delivery personnel. Codes can be permanent or temporary. Up
to 500 feet reception.
Additional base stations available (F3101MBC).
Low Voltage Wire (RB509)
The 16 gauge, stranded, dual conductor Low Voltage Wire is for connecting the AC powered transformer, or the
Solar Panel to the control board. Also used for the connection of accessories, such as locks, keypads, push buttons and
other wired control devices. This specially designed wire is UV treated, PVC coated and ready for direct burial. Available in
1000' rolls or special lengths.
POWER
Keypad
Batt Low
Grant
Permission
Answer
DV 9V
ACCESS CONTROL SYSTEMS
1-800-543-4283