Product Manual

4 MM260 Installation Instructions
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
playin gate area.
3. This gate is for vehicles only. Pedestrians
mustuse a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
1
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
playin gate area.
3. This gate is for vehicles only. Pedestrians
mustuse a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
2
12 VOLT BATTERY
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
3
12 VOLT BATTERY
4
12 VOLT BATTERY
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
5
Top View
Min 3 Ft
Max 1,000 Ft
GTO Transformer
Mounts Here
6
Locate power outlet and identify wire path to control box.
NOTE: If OUTLET is OUTSIDE use weatherproof cover.
CONTROL BOX & BATTERY INSTALLATION
Mount control box on piece of treated plywood then attach it to
post or fence using screws.
Locate control box mounting area. IMPORTANT: Be sure to mount
box at least 3 feet from AC power and 3 feet off the ground.
Make sure control box is turned OFF. Place 12 Volt battery and
weatherproof battery box within 6 feet of the control box Attach the
battery harness wires from the control box to the battery terminals.
Tighten the bolts, washers, and nuts and place the cover on the
weatherproof box. IMPORTANT: Do not connect the transformer
or solar panel directly to the battery.
Use PVC conduit from ground up to control box.